Basket (0)

Watco manufactures industrial strength floor paints, repair materials and non slip products

 

Try our new site

Repair & Resurface

 

 

I've got a roller shutter door and where the concrete meets the guide rail it keeps breaking up because of the forklifts. No matter how often I repair it the same thing happens again. Do you have concrete repairs that will last longer?


Yes, this is a common problem and I’d recommend Concrex® to repair it.  It’s really tough and sticks to metal and concrete, it's perfect for small repairs where cement based products fail. Concrex® is virtually indestructible and there are many varieties within the Concrex® range.

  

Concrex®

 Watco Concrex®

 

What’s the best concrete resurfacer, the concrete in our warehouse has started to wear out, you can see the stones and it’s getting a bit rough?  In places it’s so bad that the forklifts bump over it and it’s making the situation even worse.  I can’t afford to shut the area down to have it concreted again.


Flowtop®  is perfect for this. You just mix in the bucket we supply, pour it on and help it across the floor with a trowel. It levels out to leave you with a really tough floor that won’t dust and is harder than concrete. 

 

 

Flowtop®

Concrete resurfacer - Flowtop - Watco

 

We’ve got some broken concrete floor joint edges in our aisle ways and the forklifts are making them worse.  They’re used all day so I need something to repair them that will go off really quickly.  Have you got anything that will do this?


Yes, Concrex® Rapid Set is perfect for this.  It’s so tough and will easily cope with forklifts and cures in just 1 hour! Everything you need is in the kit, just mix the epoxy resin mortar, trowel into the joint and smooth off. You don’t need to cut the joint out, just rake out any dirt.

 

 

 

Concrex® Rapid Set

Watco Concrex Rapid Set

Can I paint latex floors? If so, what would you recommend?


Latex screeds are a problem. They are normally used before laying carpet or vinyl, and generally paints just don’t bond well.  If you haven’t laid the latex why don’t you use  Flowtop® instead? This will level the surface and leave you with a really tough floor that you can paint if required with Water Based Epoxy Floor Coat;or similar. It won’t break up under heavy traffic whereas normal latex screeds will.

 

Flowtop®

 Flowtop® - Watco resurfacing concrete repair

The concrete in my cold room floor is full of holes and I don’t know what to do with it. The temperature goes down to minus 15 degrees and everything I use just breaks up.  Do you have anything that we can use that will work?


Yes we do!  You can use the harder wearing Concrex® Cold Set. Concrex® Cold Set can be applied as low as 32°F and will not break up! Concrex® Cold Set is applied by trowel and is best for thinner, more intricate repairs.

 

Concrex® Cold Set

Concrex Cold Set

The concrete curbs in our yard keep getting bashed about by the cars driving in and out, have you got anything I can repair the curbs with that will take heavy pounding?


Curb stones are normally bedded down with cement type mortars and they don’t stand up to vehicles banging in to them, which is why they don’t last very long!  Concrete Step Repair Kit will be perfect for this.  It’s based on epoxy resin and therefore has the added strength to cope with this type of use.

 

Concrete Step Repair Kit

Watco Concrex Step Repair Kit

I’ve got thin cracks on the outside of my warehouse walls and they are so thin I can’t physically use a trowel.  I need something as easy as possible that I can just squirt in.  What can you suggest?


Heavy Duty Crack Filler as it’s so easy to use.  You can use it horizontally or vertically and it won’t fall out!  It cures really quickly, doesn’t shrink and can be applied anywhere up to 2" deep.  You apply it with a mastic gun; it’s a lot easier than using a trowel!

 

Heavy Duty Crack Filler

Heavy Duty Crack Filler - Watco wall crack repair

How do I repair hairline cracks in concrete? I would like to fill them before painting because I think the paint will highlight them and make them look worse. What can you recommend?


 Concrex® Fine Filler is designed just for this; it’s so easy to use; you can just mix as much as you want which makes it very economical. It’s an epoxy resin filler designed to fill fine cracks and bolt holes and it takes out imperfections and blemishes. It is far stronger than concrete and it doesn’t shrink.

 

 

 

Concrex® Fine Filler

Concrex Fine Filler

The pot holes in our parking lot are getting worse and worse every day. It’s used all the time and we can’t shut the area down. Do you have anything in your range that could help us?


Pot holes in parking lot only ever get worse if they’re not filled, especially in the winter.  Asphalt Repair Patch® would be perfect for this and it is really easy to use. Simply shovel it out of the bucket, create a mound over the top of the hole and compress it down with a  tamper; or the back of a shovel. It is ready immediately so no need to worry about keeping vehicles off the area, it’s perfect for pot holes in asphalt and concrete.

 

Asphalt Repair Patch®

Asphalt Repair Patch® - Watco pothole repair - Compacting

© 2017 Watco Industrial Flooring. All Rights Reserved.



Terms & conditions |  Privacy policy |  Site map |  About us

        


Problem Solving